N52 Sintered Neodymium Block Magnet With Ni-Cu-Ni Coating For Industrial Sensors & Motors

N52 Sintered Neodymium Block Magnet With Ni-Cu-Ni Coating For Industrial Sensors & Motors

HIMAGNET N52 Sintered Neodymium Block Magnet delivers maximum magnetic flux density (Br 14.3–14.8 kGs) in a compact rectangular profile.
Precision ground to ±0.05 mm tolerance with protective Ni-Cu-Ni triple-layer plating.
Engineered for industrial sensors, brushless motors, linear actuators, and high-force magnetic clamping.
Custom dimensions, magnetization orientations, and sample testing available upon request. ISO9001 certified.
Send Inquiry

Product Introduction

Xiamen Hitech Magnetics Co., Ltd. is one of the leading manufacturers and suppliers of n52 sintered neodymium block magnet with ni-cu-ni coating for industrial sensors & motors in China, also supports customized service. We have world-leading production equipment and strong manufacturing capabilities. Please feel free to buy bulk advanced n52 sintered neodymium block magnet with ni-cu-ni coating for industrial sensors & motors from our factory.

 

HIMAGNET N52 Sintered Neodymium Block Magnets represent the premium tier of commercial magnetic energy density, engineered specifically for high-precision industrial assemblies where space constraints demand maximum holding force or magnetic flux throughput. Manufactured from vacuum-sintered NdFeB alloy, these rectangular blocks deliver a nominal residual induction (Br) between 14.3 and 14.8 kGs (1.43 to 1.48 Tesla) and a maximum energy product ((BH)max) of 49 to 53 MGOe (390 to 422 kJ/m³), making them the preferred magnetic core for precision sensors, high-torque brushless drive systems, linear actuators, and structural holding fixtures.

Precision Machining and Protective Coating

Each block magnet undergoes diamond-wheel grinding to achieve standard dimensional tolerances within ±0.05 mm across length, width, and thickness. This tight mechanical consistency prevents air-gap variations and ensures reliable automated pick-and-place assembly in multi-pole stator assemblies and sensor arrays. To counteract ambient moisture and oxidation, the magnets are standard-plated with an electroplated Ni-Cu-Ni (Nickel-Copper-Nickel) multi-layer coating. This triple-layer barrier delivers a bright metallic finish and withstands standard 24 to 48-hour neutral salt spray (ASTM B117) exposure under normal indoor and controlled factory environments.

Thermal and Magnetic Operating Boundaries

Standard N52 grade sintered NdFeB is rated for continuous operation at ambient temperatures up to 80°C (176°F). When operating close to this thermal ceiling, circuit permeance must be accounted for to prevent irreversible thermal demagnetization. For applications subject to higher operational temperatures (such as enclosed automotive actuators or high-speed traction machines), HIMAGNET provides high-temperature grades including 45SH (up to 150°C) and 38EH (up to 200°C) with matching block geometries.

Industrial Applications and Integration

Due to their uniform rectangular profile and high field gradient near pole edges, N52 block magnets are widely utilized across demanding engineering sectors:

  • Industrial Automation & Sensors: Magnetic trigger elements for Hall effect sensors, reed switches, linear magnetic encoders, and pneumatic cylinder position detectors.
  • Electric Motors & Actuators: Flat stator and rotor pole segments in coreless DC motors, voice coil motors (VCM), and precision linear stages.
  • Magnetic Clamping & Tooling: High-force workpiece positioning chucks, robotic end-effectors, and switchable magnetic welding clamps.
  • Scientific & Measurement Equipment: Laboratory beam deflection units, magnetic resonance subassemblies, and sorting apparatus.

Handling and Storage Guidelines

Due to the extreme magnetic attraction forces characteristic of N52 grade rare-earth magnets, industrial handlers must observe standard safety precautions. Block magnets should be stored with non-magnetic plastic or wooden spacers between adjacent units to prevent uncontrolled snapping. Never allow large block magnets to collide freely, as sintered NdFeB material is brittle and prone to surface chipping or fracture upon high-velocity impact. Keep magnets segregated from sensitive electronic instruments, pacemakers, and magnetic media during storage and transit.

Frequently Asked Questions

Q: What is the standard magnetization orientation for these block magnets?
A: Standard blocks are magnetized through the thickness (axial direction), producing North and South poles on the two largest flat rectangular faces. Custom length-magnetized, width-magnetized, or multi-pole patterned blocks can be supplied based on technical drawings.

Q: Can HIMAGNET provide custom dimensions and chamfers?
A: Yes. In addition to standard metric cross-sections, we offer CNC wire cutting, slicing, countersunk screw-hole drilling, and custom edge chamfering to prevent corner stress concentration. Please submit your CAD drawing for engineering feasibility review.

Q: How do I select the right surface coating for corrosive or outdoor environments?
A: While standard Ni-Cu-Ni plating is optimal for indoor industrial use, severe humid, outdoor, or washdown environments benefit from Black Epoxy coating (120-200 hrs salt spray resistance) or specialized polymer resin encapsulation. Contact our engineering team for application-specific coating recommendations.

Q: What is the typical lead time for custom production batches?
A: Standard catalog sizes generally ship within 8 to 10 working days. Custom geometries or specialized plating requirements typically require 12 to 14 working days from technical drawing confirmation.

Request Engineering Support and Quotation

HIMAGNET operates an ISO9001:2015 certified manufacturing facility dedicated to permanent magnetic materials and assemblies. For custom dimensional requests, flux density calculations, magnetic circuit optimization, or formal volume quotation, please submit your inquiry and technical requirements to our engineering sales team.

Brand: HIMAGNET
Grade: N52
Shape: Block / Rectangular Bar
Material: Sintered NdFeB Magnet
Coating: Ni-Cu-Ni (Triple Layer Nickel Plating)
Tolerance: ±0.05mm
Place of Origin: Fujian, China
Max Working Temperature: 80°C
Magnetization: Through Thickness (Axial)
Residual Induction (Br): 14.3-14.8 kGs (1.43-1.48 T)
Max Energy Product (BHmax): 49-53 MGOe
Delivery Time: 8-14 Days
MOQ: 500 pieces
Certification: ISO9001, RoHS
Application: Industrial Sensors, Brushless Motors, Linear Actuators, Magnetic Clamping Assemblies

Hot Tags: n52 sintered neodymium block magnet with ni-cu-ni coating for industrial sensors & motors, manufacturers, suppliers, factory, customized

Send Inquiry

(0/10)

clearall