Product summary
This product line covers sintered NdFeB magnets used in industrial applications (blocks, rings, arc segments and custom profiles). The text below focuses on engineering constraints and procurement realities - what design teams and buyers actually need to know when specifying and ordering these magnets for motors, actuators, generators and assemblies.
Technical data
- Material: sintered Nd–Fe–B. Common grades: N35, N42, N48, N52. Specify grade by required flux and working temperature.
- Shapes: block, ring, arc/segment, disc, or custom profile to drawing.
- Magnetization: axial, radial or custom multi-pole per drawing.
- Surface: Ni-Cu-Ni standard; epoxy, Zn or PTFE available for special environments.
- Tolerances: standard ±0.05 mm; tighter tolerances quoted per order.
- Temperature: standard grades stable to ~80 °C; high-temp variants (SH/UH/EH) available up to ~150 °C.
- Testing: batch Br, Hcj and dimensional inspection included on request.
Practical notes for designers
- Thin coatings add microns - account for final assembled gap in your drawings.
- NdFeB magnets are brittle: specify chamfers or mechanical supports if magnets are press-fit.
- For rotor assemblies, supply matched sets and indicate polarity scheme to avoid rework.
- If the part will be mechanically machined after sintering, state whether you require post-machining magnetization or pre-magnetized delivery.
Common use cases
- Segmented rotor/stator magnets for compact motors.
- Magnetic couplings and clutches where concentric mounting is needed.
- Sensors, encoders and small actuators.
- Fixtures and heavy-duty retention where high flux in limited volume is required.
Procurement & supply chain
- Samples: small sample sets available for fit and flux verification.
- Production flow: drawing → sample → production approval → batch production. Provide expected annual volume to optimise tooling and price.
- Lead time: standard shapes 2–4 weeks after approval; complex/custom tooling adds time.
- Packaging: magnets are separated, padded and packed to prevent attraction damage; bulk supply shipments palletised on request.
- QC docs: supplied per batch on request (magnetic and dimensional reports).
Short FAQ
Q: Can you make high-temp variants?
A: Yes - order SH/UH grades and select appropriate coating.
Q: What is MOQ?
A: Depends on custom tooling; standard parts have low MOQ, custom tools require MOQ negotiation.
Q: Do you accept CAD files?
A: Yes - provide STEP/IGES for quoting.
Hot Tags: widely used industry neodymiun magnet for motor, manufacturers, suppliers, factory, customized, 5mm neodymium rare earth sphere ball magnets n35, n52 magnets amazon, ndfeb price, strongest magnets for magnet fishing, 500 lb fishing magnet, neodymium magnet nearby
